JUMA PA1000+ is a high-performance 1000W HF linear PA for HF to 6m. It is fully assembled, tested & calibrated, small-size (only 5.5kG / 12lbs) with digital control, min. 1000W all bands. Designed by the JUMA® team (OH2NLT & OH7SV) and assembled, tested & calibrated by us @ roWaves Technologies, in Sibiu, Romania. Hardware & firmware copyright: JUMA Radio Team (www.jumaradio.com). This product is built under commercial license from JUMA Radio in Finland, like other JUMA Radio Products that roWaves produces, under licence.
✓ CE certified ( CE certificate can be sent upon request)
✓ 2 years warranty (1 year for the MOSFET)
✓ free technical & limited support via e-mail & WhatsApp
✓how to use the PA1000 with many QRP TRXs ? See section below and User Manual
Main features (roWaves produces and sells the enhanced PA1000+ version):
- output power nominal 1000W+ PEP
- silent cooling fan (Noctua Fan) noise: (19.3dBA)
- enhanced cooling with larger heatsink
- more rugged high-power LDMOS inside (ART2K0FE)
- FT8 & digital modes: 700W with ant. SWR 1:1 (low PA voltage set / current 20Adc or below) | 500W or less with ant. SWR 1:2 (low PA voltage set / current 20Adc or below). For FT4 mode the power limits are higher.
- operating bands: all HF bands including WARC bands and 6 meter
- power supply: switchable 115/230VAC included
- built-in 12V PSU (to supply your QRP TRx from PA1000+ directly) option**– click HERE for details and separate purchase of this 12V PSU (for old customers of JUMA P1000)
- type N, UHF, or BNC connector option included*** (leave comment with the antenna connector you want, at order details, during checkout)
- STBY power consumption: only 5W from power supply
- adjustable gain: (5W…25W drive)
- protection and optical alarm: in case of over-temperature, over-current, exceeded SWR
- IMD3 distortions: -35.5 dBc @ 1kW (14MHz) | -34.4dBc @ 600W (50MHz) – see measurements
- low harmonics distortion, 65dB typ. (300uW) below fundamental
- very good input matching, SWR< 1.5 all bands, HF to 6m
- output adjustable gain: in 1dB steps, G1 to G8
- automatically band selection: possible for BCD, RS232, C-IV and analog band voltage
- latest FW version: 1.35
- LCD display for band, gain, SWR, voltage, current and temperature
- LED bar display for forward and reverse RF power
- temperature controlled fan speed, fully silent after cooling down
- carry handle included (see HERE)
- free remote Windows application included (see HERE)
- it can be interfaced with JUMA COM Hub (see HERE) – not available yet @ roWaves
- it can be interfaced with JUMA IC-705 Bluetooth Gateway (see HERE) – not available yet @ roWaves
- small size: W x H x D, 260 x 135 x 300mm
- ultra light weight: 5.5kg (12lbs)
- CE marked
- two years warranty and 1 (one) year for MOSFET warranty (see the terms)
** for pre-deposit payment (50% in advance – please email before), this 12V PSU option needs to be payed separately (at final invoicing and payment)
*** this option (RF output connector type option) is included in the final price, no extra payment needed (for both pre-deposit or 100% advanced full-payment options)
For 100% advanced full payment, you will get ALL options included, no extra charge: 12VPSU included, 115/230Vac PSU, any type of ANT connector!
PA1000+ is capable to be interfaced with following transceivers (with respective interfaces) – interface cables not available yet @ roWaves:
- JUMA TRX2A (RS232 Automatic Band Detection)
- All ICOM transceivers (CI-V Automatic Band Detection) + ICOM RCA PTT (RCA SEND)
- Elecraft K2, K3, K3S (BCD Automatic Band Detection & PTT)
- Elecraft KX3 (RS232 Automatic Band Detection & PTT)
- All Yaesu BCD band data transceivers eg FT891, FT1000, FTDX101, Yaesu FTDX3000, etc
- Kenwood (RS232 Serial COM + PTT) for TS-480 compatible protocol)
- Kenwood (RS232 Serial COM + PTT) for TS-2000 compatible protocol)
- Kenwood (TTL level 0V/5V serial COM) for TS-440, TS-450, TS-690, TS-850, TS-950 etc.
- SunSDR Pro (BCD Automatic Band Detection & PTT)
- Flex 6000 series (Serial Band Data or BCD Band Data) – based on Kenwood protocol
Shipping with DHL wordlwide (delivery assurance included). See the estimated shipping cost to your country HERE.
Roadmap of development and availability:
- 1st laboratory sample availability: est. end of May 2024
- first units planned to be delivered: est. starting with July 2024
- next batch delivery planning: est. starting with September 2024
- payments: 100% advanced full-payment (that includes all options available **,*** -> see text above for the EXACT options included). If you want to pay or 50% pre-deposit now and 50% at delivery: 12V PSU not included, preferred ANT connector included, 115/230Vac option included, but please email us before, so we can invoice you. The rest of 50% of the payment will be done at the delivery date of the PA1000+.
- accepted payment methods: only credit card or direct bank transfer (last one available on prior request, via e-mail or WhatsApp)
For PayPal payment requests, an extra €100 fee will be charged, due to PayPal charging system (only for this product).
2.823,00EUR (excl. VAT)
available on backorder